We offer the LR Series as a modular solution, where you can choose the base unit, LED unit and sounder for your application, and complement this with mountings to suit. We also offer some "standard" versions of the LR4 range that are pre-assembled to specific combinations. These can be adapted by adding other LED colours or sounders.
Specifications LR4 Series:
| Operating Temperature: |
-20º C to + 50º C |
| Operating Humidity Range: |
90% RH or less, no condensation |
| Rated Voltage: |
24 Vdc or 100-240 Vac |
| Wiring: |
Cable |
| Mounting Location & Direction: |
Indoor Use, Upright Position |
| Protection Rating*¹: |
IP65 (IEC 60529) Upright Position |
| Flash Rate: |
60 +/- 2 Flashes/min |
| Sound Level: |
Typical 85dB |
| Sound Reduction*²: |
Approximately 10dB |
| Buzzer Sound: |
4 patterns*²
Rapid Intermittent sound
Continuous sound
Rapid Hi-low
Sweep sound |
| Transistor Output: |
24 Vdc: NPN / PNP
100 – 240 Vac: NPN only |
*¹ LJ Type is IP54 *² Dependent on DIP Switch Settings *³ M2 Type Only
If you require any assistance or advice with selecting the best option for your application, please give us a call on 01495 360022.
The LR series is PATLITE's upgraded range of stack lights, featuring a number of upgrades to the function of the light, and also an easier assemble. Where some stack lights require additional screws or specialised tools, the LR series features a simple "Twist and Lock" system for easy assembly with no extra tools required.
For a demonstration of this, please see the video below from PATLITE.